OPTELEX
Optical and RF Engineering
RF amplifiers and generators
Below you can find a short list of devices made by
OPTELEX:
- VHF B-III ATV/DTV RF power amplifier, 800Wps/250Wrms;
- VHF 150÷180MHz ISM pulsed RF power amplifier 1.6KWpep;
- VHF B-II (FM) 88-108MHz RF power amplifier 1.4KWcw;
- UHF B-IV-V DTV compact RF power amplifier 200Wrms;
- UHF B-IV-V DTV RF power amplifier 240Wrms;
- UHF 100W Ham linear power amp. with Tx/Rx PIN switch;
- UHF BIV-V ATV/DTV 42/50Vdd RF driver 100Wrms;
- 2.45GHz 250Wcw microwave generator for surgical ablation;
- UHF B-IV-V DTV symmetrical doherty power amplifier 200Wrms;
- 2KWrms/4ohm (4KWpep) D class professional audio amplifier.
©Copyright by OPTELEX - All Right Reserved
GEOMeC is a family of electrical/optical interfaces properly designed to transfer four different analog signals and 16, 32 or 64 digital commands in both directions through a single pair of optical fibers.
GEOMeC medium converters represent the simplest way to send analog and digital signals over low cost optical fibers, useful to transfer groups of digital commands, alarms and telemetries without using copper wires. They can be used for all automotive applications, high voltage power supply, remote controls and home security systems.
GEOMeC is a general pourpose electrical/optical medium converter for analog and digital electrical signals over 1mm POF (0.5NA Plastic Optical Fiber) or 200um PCS (0.37NA Polymer Cladding Silica) optical fibers.